O-Series - A DutchFinger^® Tool

Used to repair or replace a "full port" valve while under pressure. Pipe sizes range from 1/2" to 4" (DN 15 to DN 100). Pressure ratings 200 to 15 psi (13.8 to 1 Bar)

 

 

TBD Series - A DutchFinger^® Tool

Used to repair "full port" valves under extreme pressure. Incorporates a seal and a gripper to lock itself into position. Pipe sizes range from 1/2" to 4" (DN 15 to DN 100). This is a high pressure tool; pressure ratings are from 600 to 250 psi (41.2 to 17.2 Bar), depending on size.

FPT Series - A DutchFinger^® Tool

Used to repair and replace "full port" valves on tanks and headers. This is an ideal tool to replace leaking tank safety valves. It incorporates a toggle locking device to secure it in place. Available in size ranges from 2" to 10" (DN 50 to DN 250). This is a high pressure tool; pressure ratings are from 600 to 250 psi, (41.2 to 17.2 Bar), depending upon size.

Soldering Aid Kits

Prized by plumbers for simplifying soldering copper pipe. Available in kit form for 1/2" to 1", 1/2 to 2", and 1/2" to 3" pipe sizes. Individual tools also available.

 

 

Hot Tap Kits

Allows manual or power tapping of existing lines and extends service without shutting off existing pressure. Available in individual tools or a variety of kits from 1/2" to 6" (DN 15 to DN 150) line size. Max pressure for all tools is 150 psi (10.3 Bar).